NCP1031DR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 6W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1031 |
| Pin Count | 8 |
| Number of Outputs | 2 |
| Output Voltage | 12V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Current | 1A |
| Voltage - Supply (Vcc/Vdd) | 7.6V~16V |
| Max Supply Current | 4mA |
| Control Features | Frequency Control |
| Topology | Boost, Flyback, Forward |
| Min Input Voltage | 8V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Up to 1MHz |
| Max Input Voltage | 16V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature |
| Duty Cycle | 75% |
| Output Isolation | Either |
| Voltage - Breakdown | 200V |
| Voltage - Start Up | 10.2V |
| Height | 1.5mm |
| Length | 5mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1031DR2G Overview
An embedded ac to dc converter is included in 8-SOIC (0.154, 3.90mm Width) package.The AC/DC power converter is available in Tape & Reel (TR) .Surface Mount is mounted in the way of this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.As a result, the switching frequency reaches Up to 1MHz .Within the range of 7.6V~16V supply voltage (Vcc/Vdd), it can be used.In total, there are 8 terminations.On the ac/dc converter, there are 8 pins.There are 8 pins on the ac-dc converter.The ac dc converters is suitable for mounting by Surface Mount .If you select the NCP1031 family, you will be able to search similar acdc converters.The number of outputs to run is 2 .The ac to dc conversions can be found in Switching Regulator or Controllers .There is 1A output current set.As a result, its output voltage is 12V .The power AC DC is capable of high efficiency when operated at a frequency of 1MHz .The AC to DC converter can be powered under 16V voltage.The AC to DC inverter may be operated with an input voltage less than 8V volts.A maximum supply current of 4mA can be handled by this power AC DC.
NCP1031DR2G Features
Packaged with 8-SOIC (0.154, 3.90mm Width)
Switching Frequency at Up to 1MHz
With 8 pins
Output Current at 1A
NCP1031DR2G Applications
There are a lot of ON Semiconductor NCP1031DR2G AC DC Converters applications.
- AC?DC USB chargers for Tablets
- Standby Power for General Off-Line Applications
- Replaces linear transformers
- Home Appliance Applications
- Low-Voltage I/O System Power
- Tablets
- RCC SMPS
- IoT Applications
- AC-DC Output Power Conversion Applications
- Battery chargers for smart phones
