Parameters |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Surface Mount |
NO |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Power (Watts) |
40W |
Subcategory |
Switching Regulator or Controllers |
Max Power Dissipation |
40W |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
240 |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Reach Compliance Code |
not_compliant |
Frequency |
100kHz |
Time@Peak Reflow Temperature-Max (s) |
30 |
Base Part Number |
NCP1050 |
Pin Count |
8 |
JESD-30 Code |
R-PDIP-T8 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Input Voltage-Nom |
8V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Voltage - Supply (Vcc/Vdd) |
7.5V~10V |
Quiescent Current |
450μA |
Input Voltage (Min) |
7.5V |
Topology |
Flyback |
Control Mode |
VOLTAGE-MODE |
Output Current-Max |
2A |
Input Voltage (Max) |
8.5V |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Load, Over Temperature |
Duty Cycle |
77% |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Voltage - Start Up |
8.5V |
Height Seated (Max) |
4.45mm |
Length |
9.78mm |
Width |
7.62mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
NCP1050P100 Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .In Tube AC/DC power converter, it is available.This AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .This AC/DC converter is designed for use within the range of 7.5V~10V supply voltage (Vcc/Vdd).There are a total of 8 terminations in it.The pins of the ac-dc converter total to 8 .The NCP1050 family can be used to search for similar acdc converters.Running 1 outputs is available.Switching Regulator or Controllers includes the ac to dc conversions.AC to DC converter is able to reach high efficiency when its frequency is 100kHz .Using a unique technique, it is possible to ensure an input voltage with a maximum value of 8.5V .It is possible to supply the ac to dc inverter with a maximum current of 2A .AC to DC converter consumes quiescent current at 450μA .
NCP1050P100 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
NCP1050P100 Applications
There are a lot of ON Semiconductor NCP1050P100 AC DC Converters applications.
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Low-Voltage I/O System Power
- Battery Chargers
- White goods
- Battery chargers for cellular phones
- Consumer electronics
- Replaces linear transformers
- Replacements for bulky plug-in transformers
- Adapter for ADSL
- Adapter/Charger for Cordless Phones