NCP1050P136G
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 136kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1050 |
| Pin Count | 7 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Max Output Current | 100mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 525μA |
| Output Current | 6.3mA |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Output Power | 20W |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 8.5V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Max Duty Cycle | 77 % |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Length | 10.16mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1050P136G Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .In Tube AC/DC power converter, it is available.As you can see, this AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.This AC/DC converter is designed for use within the range of 7.5V~10V supply voltage (Vcc/Vdd).As a result, it has a total of 8 terminations.On this ac/dc converter, there are 7 pins.The ac-dc converter has 7 pins.The ac dc converters are suitable to mount by Through Hole .Similar acdc converters can be found using the NCP1050 family.There are 1 outputs to be processed.The ac to dc conversions can be found in Switching Regulator or Controllers .Currently, the output current is set to 6.3mA .AC to DC converter is able to reach high efficiency when its frequency is 136kHz .On the basis of a unique technique, it is possible to ensure an input voltage with the maximum value of 8.5V .Coverters generate 20W in terms of output power.
NCP1050P136G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 6.3mA
NCP1050P136G Applications
There are a lot of ON Semiconductor NCP1050P136G AC DC Converters applications.
- AC/DC LED Driver applications
- Linear Adapter Replacements
- Standby power
- Appliances
- Tablets
- LED lights
- Standby Power Supplies
- DVD players
- Small off-line low voltage power supplies
- Charger
