banner_page

NCP1050P44

8 Terminations7.5V~10V NCP1050 AC to DC power converter1 Outputs


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NCP1050P44
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 475
  • Description: 8 Terminations7.5V~10V NCP1050 AC to DC power converter1 Outputs(Kg)

Details

Tags

Parameters
Quiescent Current 450μA
Input Voltage (Min) 7.5V
Topology Flyback
Control Mode VOLTAGE-MODE
Output Current-Max 2A
Input Voltage (Max) 8.5V
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Load, Over Temperature
Duty Cycle 77%
Output Isolation Isolated
Voltage - Breakdown 700V
Voltage - Start Up 8.5V
Height Seated (Max) 4.45mm
Length 9.78mm
Width 7.62mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Surface Mount NO
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2006
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Power (Watts) 40W
Subcategory Switching Regulator or Controllers
Max Power Dissipation 40W
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Terminal Pitch 2.54mm
Reach Compliance Code not_compliant
Frequency 44kHz
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number NCP1050
Pin Count 8
JESD-30 Code R-PDIP-T8
Number of Outputs 1
Qualification Status Not Qualified
Input Voltage-Nom 8V
Analog IC - Other Type SWITCHING REGULATOR
Voltage - Supply (Vcc/Vdd) 7.5V~10V

NCP1050P44 Overview


8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.In Tube case, the ac dc converter is available.There is a mounting point for this AC/DC converter in the way of Through Hole .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.A SWITCHING REGULATOR analog integrated circuit is used in this AC DC converter.The voltage range of the supply can be set to 7.5V~10V (Vcc/Vdd).In total, there are 8 terminations.The pins of the ac-dc converter count up to 8 .If you select the NCP1050 family, you will be able to search for similar acdc converters.There are 1 outputs to be run.The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter reaches high efficiency when operated at a frequency of 44kHz .Based on a unique technique, the input voltage can be ensured to have the maximal value of 8.5V .It is possible to supply the ac to dc inverter with a maximum current of 2A .Quiescent current is consumed at 450μA .

NCP1050P44 Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads

NCP1050P44 Applications


There are a lot of ON Semiconductor NCP1050P44 AC DC Converters applications.

  • USB-PD 2.0
  • Linear Adapter Replacements
  • IoT Applications
  • Chargers for cell/cordless phones
  • 3.3V power supplies
  • Standby Power for General Off-Line Applications
  • AC?DC USB chargers for Cell Phones
  • AC--DC Adapter
  • Networking
  • Home Appliance Applications

Write a review

Note: HTML is not translated!
    Bad           Good