NCP1050P44
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Power (Watts) | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Output Current-Max | 2A |
| Frequency - Switching | 44kHz |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
NCP1050P44 Overview
The ac to dc converter is embedded in 8-DIP (0.300, 7.62mm), 7 Leads package.The AC/DC power converter type is Tube .There is a AC/DC converter mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.As a result, the switching frequency reaches 44kHz .A range of 7.5V~10V supply voltages (Vcc/Vdd) can be used.In total, it has 8 terminations.A total of 8 pins are present on the ac-dc converter.With the aid of a unique technique, it is possible to ensure that the input voltage will be at the maximum value of 8.5V .Ac to dc inverters can only be powered at a maximum current of 2A .
NCP1050P44 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 44kHz
NCP1050P44 Applications
There are a lot of Rochester Electronics, LLC NCP1050P44 AC DC Converters applications.
- Power adapters for monitors
- Wireless System
- Set -Top Box (STB) Power Supply
- Automotive Infotainment
- Handheld/Battery-Powered Systems
- Adapters for Handheld Electronics
- Tablets
- AC?DC USB chargers for Cell Phones
- Open Frame Switching Power Supply
- WiFi Wireless
