NCP1050ST100T3G
| Parameters | |
|---|---|
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1050 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Max Output Current | 100mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 8.5V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
NCP1050ST100T3G Overview
The ac to dc converter is embedded in TO-261-4, TO-261AA package.It is available in Tape & Reel (TR) AC/DC power converter.There is a mounting point for this AC/DC converter in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.This AC/DC converter is designed for use within the range of 7.5V~10V supply voltage (Vcc/Vdd).It has a total of 4 terminations.There are 4 pins on this ac/dc converter.There are 4 pins on the ac-dc converter.Similar acdc converters can be found using the NCP1050 family.In this AC to DC transformer, there are 1 outputs to run.Switching Regulator or Controllers contains the ac to dc conversions.AC to DC converter is able to reach high efficiency when its frequency is 100kHz .Based on a unique technique, it is possible to ensure input voltages with the maximal value of 8.5V .
NCP1050ST100T3G Features
Packaged with TO-261-4, TO-261AA
With 4 pins
NCP1050ST100T3G Applications
There are a lot of ON Semiconductor NCP1050ST100T3G AC DC Converters applications.
- Z-Wave
- Wireless System
- Industrial controls
- Replaces linear transformers
- Standby power
- Standby power supplies for VCR
- Dimmers
- MP3
- Laptops
- AC?DC USB chargers for Cell Phones
