NCP1050ST136T3
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Reach Compliance Code | not_compliant |
| Frequency | 136kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1050 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1050ST136T3 Overview
The ac to dc converter is embedded in TO-261-4, TO-261AA package.You can get it in AC/DC power converter Tape & Reel (TR) .In this case, the AC/DC converter is mounted in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .This AC DC converter employs SWITCHING REGULATOR analog IC type.The AC/DC converter is capable of being used when the supply voltage is 7.5V~10V (Vcc/Vdd).In total, there are 4 terminations.The ac/dc converter has a total of 4 pins.The pins of the ac-dc converter count up to 4 .If you select the NCP1050 family, you will be able to search for similar acdc converters.In this AC to DC transformer, there are 1 outputs to run.Switching Regulator or Controllers contains the ac to dc conversions.High efficiency can be achieved when AC to DC converters frequency is set to 136kHz .Based on a unique technique, it is possible to ensure input voltages with the maximal value of 8.5V .In theory, the maximum current that can be supplied to the ac to dc inverter is 2A .
NCP1050ST136T3 Features
Packaged with TO-261-4, TO-261AA
With 4 pins
NCP1050ST136T3 Applications
There are a lot of ON Semiconductor NCP1050ST136T3 AC DC Converters applications.
- Standby Power Supply
- USB-PD 2.0
- Switching AC-DC Adapter
- PDAs
- AC/DC LED Driver applications
- Adapter/Charger for Cell
- Vacuum Cleaner
- Laptops and personal digital assistants
- Switching AC-DC Charger
- Universal Off-Line Power Supplies
