banner_page

NCP1051P100

8 Terminations7.5V~10V 8 Pin NCP1051 AC to DC power converter1 Outputs


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NCP1051P100
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 849
  • Description: 8 Terminations7.5V~10V 8 Pin NCP1051 AC to DC power converter1 Outputs(Kg)

Details

Tags

Parameters
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Surface Mount NO
Number of Pins 8
Operating Temperature -40°C~150°C TJ
Packaging Tube
Published 2006
JESD-609 Code e0
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Terminal Finish Tin/Lead (Sn/Pb)
Power (Watts) 40W
Subcategory Switching Regulator or Controllers
Max Power Dissipation 40W
Terminal Position DUAL
Peak Reflow Temperature (Cel) 240
Number of Functions 1
Terminal Pitch 2.54mm
Reach Compliance Code not_compliant
Frequency 100kHz
Time@Peak Reflow Temperature-Max (s) 30
Base Part Number NCP1051
Pin Count 8
Number of Outputs 1
Qualification Status Not Qualified
Input Voltage-Nom 8V
Analog IC - Other Type SWITCHING REGULATOR
Voltage - Supply (Vcc/Vdd) 7.5V~10V
Quiescent Current 450μA
Input Voltage (Min) 7.5V
Topology Flyback
Control Mode VOLTAGE-MODE
Output Current-Max 2A
Control Technique PULSE WIDTH MODULATION
Switcher Configuration SINGLE
Internal Switch(s) Yes
Fault Protection Current Limiting, Open Loop, Over Load, Over Temperature
Duty Cycle 77%
Output Isolation Isolated
Voltage - Breakdown 700V
Voltage - Start Up 8.5V
Height Seated (Max) 4.45mm
Width 7.62mm
RoHS Status Non-RoHS Compliant
Lead Free Contains Lead

NCP1051P100 Overview


In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.It is available in Tube AC/DC power converter.The AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.The AC/DC converter is capable of being used when the supply voltage is 7.5V~10V (Vcc/Vdd).There have been 8 terminations of this program.It contains 8 pins.There are 8 pins on the ac-dc converter.Based on the NCP1051 family, you can search for similar acdc converters.A total of 1 outputs are available for processing.Switching Regulator or Controllers contains the ac to dc conversions.A high efficiency can be achieved by operating at a frequency of 100kHz .It is possible to supply the ac to dc inverter with a maximum current of 2A .In the state of 450μA , AC to DC converter consumes quiescent current.

NCP1051P100 Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins

NCP1051P100 Applications


There are a lot of ON Semiconductor NCP1051P100 AC DC Converters applications.

  • Small off-line low voltage power supplies
  • Adapters for Handheld Electronics
  • AC/DC Adaptors/Chargers for E-books
  • Dimmers
  • PDAs
  • Adapters
  • Cellular phone chargers
  • Set-top boxes
  • AC/DC LED Driver applications
  • Industrial controls

Write a review

Note: HTML is not translated!
    Bad           Good