NCP1051P136G
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 week ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 136kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1051 |
| Pin Count | 7 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Topology | Flyback |
| Min Input Voltage | -300mV |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Max Input Voltage | 10V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1051P136G Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.In Tube AC/DC power converter, it is available.A AC/DC converter of this type is mounted in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~150°C TJ °C.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.This AC/DC converter is suitable for operation in the range of 7.5V~10V supply voltage (Vcc/Vdd).There are a total of 8 terminations in it.Approximately 7 pins are present on the ac/dc converter.There are a total of 7 pins on the ac-dc converter.Suitable mounting is provided by Through Hole .Based on the NCP1051 family, you can search for similar acdc converters.The number of outputs to run is 1 .There are a ac to dc conversions included in Switching Regulator or Controllers .A high efficiency can be achieved by operating at a frequency of 136kHz .It is possible to supply the ac to dc inverter with a maximum current of 2A .Under 10V , it is possible to power the AC to DC converter's input voltage.It is possible to use the AC to DC inverter with an input voltage less than -300mV V.
NCP1051P136G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
NCP1051P136G Applications
There are a lot of ON Semiconductor NCP1051P136G AC DC Converters applications.
- Adapter/Charger for Cordless Phones
- ATX/BTX Auxiliary Power
- Shaver Charger
- Vacuum Cleaner
- RCC SMPS
- Laptops
- AC/DC Adaptors/Chargers for PDAs
- Adapters for Handheld Electronics
- Z-Wave
- Switching AC-DC Charger
