Parameters |
Topology |
Flyback |
Control Mode |
VOLTAGE-MODE |
Output Current-Max |
2A |
Input Voltage (Max) |
8.5V |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Load, Over Temperature |
Duty Cycle |
77% |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Voltage - Start Up |
8.5V |
Height Seated (Max) |
4.45mm |
Length |
9.78mm |
Width |
7.62mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Surface Mount |
NO |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Power (Watts) |
40W |
Subcategory |
Switching Regulator or Controllers |
Max Power Dissipation |
40W |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Reach Compliance Code |
not_compliant |
Frequency |
44kHz |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
NCP1051 |
Pin Count |
8 |
JESD-30 Code |
R-PDIP-T8 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Input Voltage-Nom |
8V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Voltage - Supply (Vcc/Vdd) |
7.5V~10V |
Quiescent Current |
450μA |
Input Voltage (Min) |
7.5V |
NCP1051P44 Overview
This ac to dc converter is included in the package 8-DIP (0.300, 7.62mm), 7 Leads .The AC/DC power converter type is Tube .It is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .Supply voltage (Vcc/Vdd) does not need to exceed 7.5V~10V .As a result, it has a total of 8 terminations.There are 8 pins on the ac-dc converter.Similar acdc converters can be found using the NCP1051 family.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .When operating at a frequency of 44kHz , AC to DC converter is capable of reaching high efficiency.It is possible to ensure a maximum value of 8.5V for the input voltage using a unique technique.The maximum current that can be supplied to the ac to dc inverter is 2A .A quiescent current of 0 volts is consumed by the AC to DC power supply.
NCP1051P44 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
NCP1051P44 Applications
There are a lot of ON Semiconductor NCP1051P44 AC DC Converters applications.
- Portable audio
- Linear Adapter Replacements
- Universal Off-Line Power Supplies
- Small off-line low voltage power supplies
- AC--DC Adapter
- MPS parts
- Battery Chargers
- Appliance Power Supplies
- Laptops
- Battery chargers for mobile devices with touchpad display