NCP1051P44G
| Parameters | |
|---|---|
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 44kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1051 |
| Pin Count | 7 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 8.5V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | OBSOLETE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
NCP1051P44G Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.The AC/DC power converter type is Tube .As you can see, this AC/DC converter is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.Vcc/Vdd can be used within the range of 7.5V~10V supply voltage.As a result, it has had 8 terminations.There are 7 pins on this ac/dc converter.The ac-dc converter has 7 pins.Through Hole is the recommended mounting method for the ac dc converters.Based on the NCP1051 family, you can search for similar acdc converters.There are 1 outputs to be processed.The ac to dc conversions are included in Switching Regulator or Controllers .As long as AC to DC converter is operated at frequency 44kHz ,it is capable of attaining high efficiency.On the basis of a unique technique, it is possible to ensure an input voltage with the maximum value of 8.5V .In theory, the maximum current that can be supplied to the ac to dc inverter is 2A .
NCP1051P44G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
NCP1051P44G Applications
There are a lot of ON Semiconductor NCP1051P44G AC DC Converters applications.
- Dimmers
- Standby Power Supply
- Appliances
- Records
- Consumer electronics
- Standby Power for General Off-Line Applications
- USB type-c v1.2 chargers with optional VDM
- Standby power supplies for IR
- Appliance Power Supplies
- Remotely-controlled appliances
