NCP1051ST100T3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 20 hours ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1051 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 8.5V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height | 1.57mm |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1051ST100T3G Overview
It is embedded in package TO-261-4, TO-261AA .In Tape & Reel (TR) AC/DC power converter, it is available.This AC/DC converter is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.Supply voltage (Vcc/Vdd) does not need to exceed 7.5V~10V .There are a total of 4 terminations in it.A ac/dc converter with 4 pins is available.There are 4 pins on the ac-dc converter.Surface Mount are the recommended mounting method for the ac dc converters.The NCP1051 family allows you to search for similar acdc converters.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .As long as AC to DC converter is operated at frequency 100kHz ,it is capable of attaining high efficiency.With the aid of a unique technique, it is possible to ensure that the input voltage will be at the maximum value of 8.5V .It is possible to supply the ac to dc inverter with a maximum current of 2A .
NCP1051ST100T3G Features
Packaged with TO-261-4, TO-261AA
With 4 pins
NCP1051ST100T3G Applications
There are a lot of ON Semiconductor NCP1051ST100T3G AC DC Converters applications.
- Standby Power for General Off-Line Applications
- Adapters for Handheld Electronics
- Utility meters
- Auxiliary Power Supply
- Battery Chargers
- PDAs
- Portable Apparatus
- Wall switches
- Linear Adapter Replacements
- Power tools fast chargers with trickle and on/off
