NCP1051ST44T3
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Reach Compliance Code | not_compliant |
| Frequency | 44kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1051 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1051ST44T3 Overview
This ac to dc converter is embedded in package TO-261-4, TO-261AA .The AC/DC power converter Tape & Reel (TR) is available for this product.The AC/DC converter is mounted in the way of Surface Mount .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .It can be used within the range of 7.5V~10V supply voltage (Vcc/Vdd).There have been 4 terminations of this program.A ac/dc converter with 4 pins is available.The pins of the ac-dc converter total to 4 .A similar acdc converter can be searched by using the NCP1051 family.A total of 1 outputs need to be run.The ac to dc conversions are contained in Switching Regulator or Controllers .When operating at a frequency of 44kHz , AC to DC converter is capable of reaching high efficiency.Using a unique technique, it is possible to ensure an input voltage with a maximum value of 8.5V .It is possible to supply the ac to dc inverter with a maximum current of 2A .
NCP1051ST44T3 Features
Packaged with TO-261-4, TO-261AA
With 4 pins
NCP1051ST44T3 Applications
There are a lot of ON Semiconductor NCP1051ST44T3 AC DC Converters applications.
- USB type-c v1.2 chargers with optional VDM
- Home Appliance Applications
- Standby Power Supplies
- Industrial controls
- Standby power supplies for TV
- Adapter/Charger for Cordless Phones
- Networking
- Set -Top Box (STB) Power Supply
- AC/DC Adaptors/Chargers for E-books
- Portable Apparatus
