NCP1051ST44T3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Frequency | 44kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1051 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 8.5V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height | 1.57mm |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1051ST44T3G Overview
This ac to dc converter is included in the package TO-261-4, TO-261AA .You can get it in AC/DC power converter Tape & Reel (TR) .This AC/DC converter is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.Supply voltage (Vcc/Vdd) does not need to exceed 7.5V~10V .It has a total of 4 terminations.Approximately 4 pins are present on the ac/dc converter.There are a total of 4 pins on the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .Based on the NCP1051 family, you can search for similar acdc converters.A total of 1 outputs need to be run.AC to DC converter is included in Switching Regulator or Controllers .A high efficiency is achieved when operating at a frequency of 44kHz .Based on a unique technique, the input voltage can be ensured to have the maximal value of 8.5V .Ac to dc inverters can only be powered at a maximum current of 2A .
NCP1051ST44T3G Features
Packaged with TO-261-4, TO-261AA
With 4 pins
NCP1051ST44T3G Applications
There are a lot of ON Semiconductor NCP1051ST44T3G AC DC Converters applications.
- Portable Apparatus
- Linear Adapter Replacements
- Standby Power Supply
- Adapter for ADSL
- Standby Power Supplies
- Dimmers
- Standby and Auxiliary Power Supplies
- Lighting controls
- AC--DC Adapter
- Power Adaptors
