NCP1052P100
| Parameters | |
|---|---|
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1052 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Quiescent Current | 450μA |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Through Hole |
NCP1052P100 Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .There is a AC/DC power converter of Tube available.A AC/DC converter of this type is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.Vcc/Vdd can be used within the range of 7.5V~10V supply voltage.As a result, it has had 8 terminations.The pins of the ac-dc converter total to 8 .If you select the NCP1052 family, you will be able to search similar acdc converters.A total of 1 outputs are to be processed.The ac to dc conversions can be found in Switching Regulator or Controllers .A high efficiency can be achieved by operating at a frequency of 100kHz .It is possible to ensure a maximum value of 8.5V for the input voltage using a unique technique.An amount of current of 2A can be supplied to the ac to dc inverter.When the current is at 450μA , AC to DC converter consumes quiescent current.
NCP1052P100 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
NCP1052P100 Applications
There are a lot of ON Semiconductor NCP1052P100 AC DC Converters applications.
- Switching AC-DC Adapter
- Auxiliary Power Supply
- Automotive Telematics
- Remotely-controlled appliances
- Battery Chargers
- Smartphones
- Power tools
- Set -Top Box (STB) Power Supply
- Power adapters for monitors
- AC/DC Adaptors/Chargers for Cell Phones
