NCP1052P100G
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 1 day ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 40W |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1052 |
| Pin Count | 7 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 525μA |
| Output Current | 300mA |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Output Power | 20W |
| Topology | Flyback |
| Min Input Voltage | -300mV |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 10V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 265V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Max Duty Cycle | 77 % |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Start Up | 8.5V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1052P100G Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .It is available in Tube AC/DC power converter.The AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.As long as the supply voltage (Vcc/Vdd) is within the range of 7.5V~10V , the AC/DC converter may be used.Total terminations are 8 .There are 7 pins on this ac/dc converter.The ac-dc converter has 7 pins.Through Hole is the recommended mounting method for the ac dc converters.A similar acdc converter can be searched by using the NCP1052 family.In this AC to DC transformer, there are 1 outputs to run.The following ac to dc conversions are contained in Switching Regulator or Controllers .The output current is set to 300mA .Its output voltage amounts to 700V .A high efficiency is achieved when operating at a frequency of 100kHz .Under 10V , it is possible to power the AC to DC converter's input voltage.In the AC to DC transformer of a coverter, the output power generated is 20W .An input voltage of less than -300mV V is required to operate the AC to DC inverter.
NCP1052P100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 300mA
NCP1052P100G Applications
There are a lot of ON Semiconductor NCP1052P100G AC DC Converters applications.
- LED Driver
- Standby power supplies for VCR
- Rice Cooker
- AC/DC Adaptors/Chargers for Cell Phones
- White goods
- Chargers for cell/cordless phones
- ATX/BTX Auxiliary Power
- Wireless System
- Power tools
- Adaptors for Portable Media Player
