Parameters |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Surface Mount |
NO |
Number of Pins |
8 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e0 |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin/Lead (Sn/Pb) |
Power (Watts) |
40W |
Subcategory |
Switching Regulator or Controllers |
Max Power Dissipation |
40W |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Reach Compliance Code |
not_compliant |
Frequency |
44kHz |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
NCP1052 |
Pin Count |
8 |
Number of Outputs |
1 |
Qualification Status |
Not Qualified |
Input Voltage-Nom |
8V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Voltage - Supply (Vcc/Vdd) |
7.5V~10V |
Quiescent Current |
450μA |
Input Voltage (Min) |
7.5V |
Topology |
Flyback |
Control Mode |
VOLTAGE-MODE |
Output Current-Max |
2A |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Load, Over Temperature |
Duty Cycle |
77% |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Voltage - Start Up |
8.5V |
Height Seated (Max) |
4.45mm |
Width |
7.62mm |
RoHS Status |
Non-RoHS Compliant |
Lead Free |
Contains Lead |
NCP1052P44 Overview
In the 8-DIP (0.300, 7.62mm), 7 Leads package, the ac to dc converter is embedded.You can get it in AC/DC power converter Tube .As you can see, this AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.Within the range of 7.5V~10V supply voltage (Vcc/Vdd), it can be used.There are a total of 8 terminations in it.It contains 8 pins.A total of 8 pins are present on the ac-dc converter.The NCP1052 family can be used to search for similar acdc converters.A total of 1 outputs need to be run.The ac to dc conversions are contained in Switching Regulator or Controllers .A high efficiency can be achieved by operating at a frequency of 44kHz .In theory, the maximum current that can be supplied to the ac to dc inverter is 2A .Quiescent current is consumed at 450μA .
NCP1052P44 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
NCP1052P44 Applications
There are a lot of ON Semiconductor NCP1052P44 AC DC Converters applications.
- Open Frame Switching Power Supply
- Adapter for ADSL
- Linear Adapter Replacements
- Appliances
- MPS parts
- Replaces linear transformers
- Vacuum Cleaner
- Standby power supplies for TV
- Air conditioners
- AC--DC Adapter