NCP1052ST100T3
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Reach Compliance Code | not_compliant |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | NCP1052 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1052ST100T3 Overview
A ac to dc converter of the package TO-261-4, TO-261AA contains the ac to dc converter.In Tape & Reel (TR) case, the ac dc converter is available.A AC/DC converter of this type is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.Vcc/Vdd can be used within the range of 7.5V~10V supply voltage.In total, it has 4 terminations.The ac/dc converter has a total of 4 pins.Up to 4 pins are present on the ac-dc converter.The NCP1052 family can be used to search for similar acdc converters.A total of 1 outputs are to be processed.There are a ac to dc conversions included in Switching Regulator or Controllers .AC to DC converter reaches high efficiency when operated at a frequency of 100kHz .Using a unique technique, a voltage with a maximum value of 8.5V can be ensured.Ac to dc inverters can be powered by up to 2A current.
NCP1052ST100T3 Features
Packaged with TO-261-4, TO-261AA
With 4 pins
NCP1052ST100T3 Applications
There are a lot of ON Semiconductor NCP1052ST100T3 AC DC Converters applications.
- Off--line Battery Charger
- Tablets
- Adapter for ADSL
- Auxiliary Power Supply
- Universal Off-Line Power Supplies
- Power tools
- AC/DC Adaptors/Chargers for Cordless Phone
- Battery Chargers
- Laptops
- Chargers for cell/cordless phones
