NCP1052ST100T3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 40W |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1052 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 8.5V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height | 1.57mm |
| Length | 6.5mm |
| Width | 3.5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1052ST100T3G Overview
TO-261-4, TO-261AA is the package in which the ac to dc converter is embedded.There is a AC/DC power converter of Tape & Reel (TR) available.A AC/DC converter of this type is mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.Analog ICs of type SWITCHING REGULATOR are used in this AC DC converter.Supply voltage (Vcc/Vdd) does not need to exceed 7.5V~10V .Total terminations are 4 .The ac/dc converter has 4 pins.A total of 4 pins are present on the ac-dc converter.The ac dc converters are suitable for mounting by Surface Mount .Search similar acdc converters based on NCP1052 family members.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions can be found in Switching Regulator or Controllers .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 100kHz .Based on a unique technique, it is possible to ensure input voltages with the maximal value of 8.5V .Ac to dc inverters can be supplied with a maximum current of 2A .
NCP1052ST100T3G Features
Packaged with TO-261-4, TO-261AA
With 4 pins
NCP1052ST100T3G Applications
There are a lot of ON Semiconductor NCP1052ST100T3G AC DC Converters applications.
- Standby Power for General Off-Line Applications
- Power tools fast chargers with trickle and on/off
- Home Appliance Applications
- Charger
- Z-Wave
- Standby and Auxiliary Power Supplies
- Air conditioners
- Battery Chargers
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Consumer electronics
