NCP1052ST136T3G
| Parameters | |
|---|---|
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | 136kHz |
| Max Input Voltage | 10V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height | 1.57mm |
| Length | 6.5mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 40W |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1052 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Topology | Flyback |
| Min Input Voltage | -300mV |
NCP1052ST136T3G Overview
The ac to dc converter is embedded in TO-261-4, TO-261AA package.Tape & Reel (TR) case is available for the ac dc converter.It is mounted in the way of Surface Mount .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.This AC DC converter employs SWITCHING REGULATOR analog IC type.When the switching frequency reaches 136kHz , the circuit is closed.The AC/DC converter is capable of being used when the supply voltage is 7.5V~10V (Vcc/Vdd).A total of 4 terminations have been recorded.The ac/dc converter has a total of 4 pins.The pins of the ac-dc converter count up to 4 .Surface Mount is a suitable mounting point for the ac dc converters.Similar acdc converters can be found using the NCP1052 family.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .AC to DC converter is able to reach high efficiency when its frequency is 100kHz .An amount of current of 2A can be supplied to the ac to dc inverter.There is an option to power the AC to DC converter input voltage under 10V .It is possible to use the AC to DC inverter with an input voltage less than -300mV V.
NCP1052ST136T3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 136kHz
With 4 pins
NCP1052ST136T3G Applications
There are a lot of ON Semiconductor NCP1052ST136T3G AC DC Converters applications.
- Standby power supplies for IR
- SMPS house keeping power supplies
- Air conditioners
- Utility meters
- Battery Chargers
- Battery chargers for media tablets
- Replacements for bulky plug-in transformers
- Battery chargers for mobile devices with touchpad display
- DVD players
- PDAs
