NCP1053P100
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | not_compliant |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1053 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Current | 400mA |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Quiescent Current | 500μA |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Width | 7.62mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
NCP1053P100 Overview
In the 8-DIP (0.300, 7.62mm), 7 Leads package, the ac to dc converter is embedded.Tube case is available for the ac dc converter.This AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.The AC/DC converter is capable of being used when the supply voltage is 7.5V~10V (Vcc/Vdd).There are a total of 8 terminations in it.The ac/dc converter has a total of 8 pins.The pins of the ac-dc converter total to 8 .It is possible to search for similar acdc converters by using the NCP1053 family.There are 1 outputs to run.The ac to dc conversions are included in Switching Regulator or Controllers .Current output is set to 400mA .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 100kHz .When 500μA is reached, AC to DC converter consumes quiescent current.
NCP1053P100 Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
Output Current at 400mA
NCP1053P100 Applications
There are a lot of ON Semiconductor NCP1053P100 AC DC Converters applications.
- Automotive Clusters
- Battery chargers for cordless
- Portable audio
- Open Frame Switching Power Supply
- Adapter/Charger for Cordless Phones
- Small off-line low voltage power supplies
- Industrial controls
- ZigBee
- AC--DC Adapter
- Shaver Charger
