Parameters |
Mounting Type |
Through Hole |
Package / Case |
8-DIP (0.300, 7.62mm), 7 Leads |
Surface Mount |
NO |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tube |
Published |
2006 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Terminal Finish |
Tin (Sn) |
Power (Watts) |
40W |
HTS Code |
8542.39.00.01 |
Subcategory |
Switching Regulator or Controllers |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Terminal Pitch |
2.54mm |
Reach Compliance Code |
unknown |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
NCP1053 |
Pin Count |
7 |
JESD-30 Code |
R-PDIP-T8 |
Qualification Status |
Not Qualified |
Input Voltage-Nom |
8V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Voltage - Supply (Vcc/Vdd) |
7.5V~10V |
Input Voltage (Min) |
7.5V |
Topology |
Flyback |
Control Mode |
VOLTAGE-MODE |
Output Current-Max |
2A |
Frequency - Switching |
100kHz |
Input Voltage (Max) |
8.5V |
Control Technique |
PULSE WIDTH MODULATION |
Switcher Configuration |
SINGLE |
Internal Switch(s) |
Yes |
Fault Protection |
Current Limiting, Open Loop, Over Load, Over Temperature |
Duty Cycle |
77% |
Output Isolation |
Isolated |
Voltage - Breakdown |
700V |
Voltage - Start Up |
8.5V |
Height Seated (Max) |
4.45mm |
Length |
9.78mm |
Width |
7.62mm |
NCP1053P100G Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .In Tube AC/DC power converter, it is available.In this case, the AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.This AC DC converter employs SWITCHING REGULATOR analog IC type.In this AC to DC transformer, the switching frequency is 100kHz .The voltage range of the supply can be set to 7.5V~10V (Vcc/Vdd).It has a total of 8 terminations.A total of 7 pins are present on the ac-dc converter.The NCP1053 family allows you to search for similar acdc converters.The ac to dc conversions are included in Switching Regulator or Controllers .Based on a unique technique, the input voltage can be ensured to have the maximal value of 8.5V .Ac to dc inverters can only be powered at a maximum current of 2A .
NCP1053P100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
NCP1053P100G Applications
There are a lot of ON Semiconductor NCP1053P100G AC DC Converters applications.
- Low power ac?dc Adapters for Chargers
- Power Adaptors
- Air Conditioning
- Battery chargers for media tablets
- Set-top boxes
- Battery Chargers
- Chargers for cell/cordless phones
- AC?DC USB chargers for Cell Phones
- Set -Top Box (STB) Power Supply
- Humidifier