NCP1053ST100T3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 40W |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1053 |
| Pin Count | 4 |
| JESD-30 Code | R-PDSO-G4 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Frequency - Switching | 100kHz |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 1.75mm |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | ROHS3 Compliant |
NCP1053ST100T3G Overview
There is a ac to dc converter embedded in package TO-261-4, TO-261AA .You can get it in AC/DC power converter Tape & Reel (TR) .Surface Mount mounts this AC/DC converter.Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.Analog IC type SWITCHING REGULATOR is utilized in this AC DC converter.As a result, the switching frequency reaches 100kHz .This AC/DC converter is designed for use within the range of 7.5V~10V supply voltage (Vcc/Vdd).A total of 4 terminations have been recorded.The ac-dc converter has 4 pins.It is possible to search for similar acdc converters by using the NCP1053 family.Switching Regulator or Controllers contains the ac to dc conversions.On the basis of a unique technique, it is possible to ensure an input voltage with the maximum value of 8.5V .A maximum current of 2A may be supplied to the ac to dc inverter.
NCP1053ST100T3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 100kHz
NCP1053ST100T3G Applications
There are a lot of ON Semiconductor NCP1053ST100T3G AC DC Converters applications.
- Standby Power Supplies
- Standby Power Supplies
- Open Frame Switching Power Supply
- ZigBee
- Battery chargers for cordless
- Replacements for bulky plug-in transformers
- Laptops and personal digital assistants
- Standby and Auxiliary Power Supplies
- Industrial controls
- MPS parts
