NCP1054ST136T3
| Parameters | |
|---|---|
| Voltage - Start Up | 8.5V |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Surface Mount | YES |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e0 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Power (Watts) | 40W |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Reach Compliance Code | not_compliant |
| Frequency | 136kHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1054 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
NCP1054ST136T3 Overview
TO-261-4, TO-261AA is the package in which the ac to dc converter is embedded.There is a AC/DC power converter of Tape & Reel (TR) available.As you can see, this AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.An analog IC of type SWITCHING REGULATOR is employed in this AC DC converter.This AC/DC converter is designed for use within the range of 7.5V~10V supply voltage (Vcc/Vdd).In total, there are 4 terminations.There are 4 pins on this ac/dc converter.In this ac-dc converter, there are 4 pins.The NCP1054 family can be used to search for similar acdc converters.A total of 1 outputs are available for processing.The ac to dc conversions are included in Switching Regulator or Controllers .High efficiency can be achieved when AC to DC converters frequency is set to 136kHz .Based on a unique technique, the input voltage can be ensured to have the maximal value of 8.5V .Ac to dc inverters can be powered by up to 2A current.
NCP1054ST136T3 Features
Packaged with TO-261-4, TO-261AA
With 4 pins
NCP1054ST136T3 Applications
There are a lot of ON Semiconductor NCP1054ST136T3 AC DC Converters applications.
- Z-Wave
- Charger
- AC?DC USB chargers for Cameras
- AC?DC USB chargers for Tablets
- USB type-c v1.2 chargers with optional VDM
- Low power ac?dc Adapters for Chargers
- Rice Cooker
- Tablets
- Adapters
- Power adapters for monitors
