NCP1055P136G
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 40W |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 136kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1055 |
| Pin Count | 7 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 650μA |
| Output Current | 680mA |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Output Power | 20W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 265V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Nominal Input Voltage | 265V |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Max Duty Cycle | 77 % |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Start Up | 8.5V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | Unknown |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1055P136G Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm), 7 Leads package.In Tube AC/DC power converter, it is available.Through Hole mounts this AC/DC converter.The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.This AC DC converter employs SWITCHING REGULATOR analog IC type.This AC/DC converter is suitable for operation in the range of 7.5V~10V supply voltage (Vcc/Vdd).There are a total of 8 terminations.Approximately 7 pins are present on the ac/dc converter.The pins of the ac-dc converter total to 7 .It are possible to mount thare ac dc converters by Through Hole .The NCP1055 family allows you to search for similar acdc converters.The number of outputs to run is 1 .There are a ac to dc conversions included in Switching Regulator or Controllers .It has been set to 680mA for the output current.In this AC to DC transformer, the output voltage is 700V .A high efficiency is achieved when operating at a frequency of 136kHz .You may read the REACH SVHC standard at Unknown .There is a possibility of powering the AC to DC converter under a voltage of 265V .A coverter produces 20W watts of output power.Input voltages less than 85V volts can be used to operate the AC to DC inverter.AC to DC power converters should be able to accept input voltages (AC) below 265V .
NCP1055P136G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 680mA
NCP1055P136G Applications
There are a lot of ON Semiconductor NCP1055P136G AC DC Converters applications.
- Home appliances
- Battery chargers for cordless
- Auxiliary Power Supply
- AC-DC Output Power Conversion Applications
- Adapter for ADSL
- Standby Power for General Off-Line Applications
- PDAs
- Set Top Boxes (STB)
- Portable audio
- Laptops and personal digital assistants
