NCP1055P44G
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Power (Watts) | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Input Voltage (Min) | 7.5V |
| Topology | Flyback |
| Output Current-Max | 2A |
| Frequency - Switching | 44kHz |
| Input Voltage (Max) | 8.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Length | 9.78mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
NCP1055P44G Overview
In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.The AC/DC power converter is available in Tube .There is a mounting point for this AC/DC converter in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.The AC DC converter utilizes a type SWITCHING REGULATOR analog IC.When the switching frequency reaches 44kHz , the circuit is closed.The AC/DC converter is capable of being used when the supply voltage is 7.5V~10V (Vcc/Vdd).A total of 8 terminations have been recorded.A total of 8 pins are present on the ac-dc converter.With the aid of a unique technique, it is possible to ensure that the input voltage will be at the maximum value of 8.5V .The maximum current that can be supplied to the ac to dc inverter is 2A .
NCP1055P44G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 44kHz
NCP1055P44G Applications
There are a lot of Rochester Electronics, LLC NCP1055P44G AC DC Converters applications.
- DVD players
- Automotive Infotainment
- Automotive Clusters
- Battery chargers for cordless
- Set Top Boxes (STB)
- LED Driver
- Smartphones
- Cleaners
- Battery Chargers
- Low power ac?dc Adapters for Chargers
