NCP1055P44G
| Parameters | |
|---|---|
| Lifecycle Status | OBSOLETE (Last Updated: 5 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 930.006106mg |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 44kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1055 |
| Pin Count | 7 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Operating Supply Current | 650μA |
| Output Current | 6.3mA |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Output Power | 20W |
| Topology | Flyback |
| Control Mode | VOLTAGE-MODE |
| Input Voltage (Max) | 8.5V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Max Duty Cycle | 77 % |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height Seated (Max) | 4.45mm |
| Length | 10.16mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
NCP1055P44G Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .The AC/DC power converter is available in Tube .In this case, the AC/DC converter is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .This AC/DC converter is designed for use within the range of 7.5V~10V supply voltage (Vcc/Vdd).In total, there are 8 terminations.The ac/dc converter has a total of 7 pins.The pins of the ac-dc converter count up to 7 .Through Hole is a suitable mounting point for the ac dc converters.You can search similar acdc converters based on NCP1055 family.A total of 1 outputs need to be run.Switching Regulator or Controllers contains the ac to dc conversions.Currently, the output current is set to 6.3mA .As long as AC to DC converter is operated at frequency 44kHz ,it is capable of attaining high efficiency.On the basis of a unique technique, it is possible to ensure an input voltage with the maximum value of 8.5V .20W is the output power of a coverter.
NCP1055P44G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 7 pins
Output Current at 6.3mA
NCP1055P44G Applications
There are a lot of ON Semiconductor NCP1055P44G AC DC Converters applications.
- Automotive Telematics
- Battery chargers for cordless
- Air conditioners
- SMPS house keeping power supplies
- LED Driver
- Power tools fast chargers with trickle and on/off
- ATX/BTX Auxiliary Power
- WiFi Wireless
- Z-Wave
- AC?DC USB chargers for Tablets
