NCP1055ST100T3G
| Parameters | |
|---|---|
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 20W |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Frequency | 100kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1055 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Max Output Current | 680mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Topology | Flyback |
| Min Input Voltage | -300mV |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 10V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height | 1.57mm |
| Length | 6.5mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
NCP1055ST100T3G Overview
There is a ac to dc converter embedded in package TO-261-4, TO-261AA .The AC/DC power converter is available in Tape & Reel (TR) .In this case, the AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .A range of 7.5V~10V supply voltages (Vcc/Vdd) can be used.In total, it has 4 terminations.A ac/dc converter with 4 pins is available.In this ac-dc converter, there are 4 pins.The ac dc converters are suitable to mount by Surface Mount .If you select the NCP1055 family, you will be able to search for similar acdc converters.In this AC to DC transformer, there are 1 outputs to run.The ac to dc conversions are contained in Switching Regulator or Controllers .This power AC DC is capable of reaching high efficiencies when operating at a frequency of 100kHz .There is an option to power the AC to DC converter input voltage under 10V .A voltage of less than -300mV V can be used with the AC to DC inverter.
NCP1055ST100T3G Features
Packaged with TO-261-4, TO-261AA
With 4 pins
NCP1055ST100T3G Applications
There are a lot of ON Semiconductor NCP1055ST100T3G AC DC Converters applications.
- Smartphones
- Laptops
- Set-top boxes
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Consumer electronics
- Adapter/Charger for Cell
- AC/DC Adaptors/Chargers for E-books
- Battery chargers for cordless
- Laptops and personal digital assistants
- Power Adaptors
