NCP1055ST136T3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 20W |
| Max Power Dissipation | 40W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Frequency | 136kHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | NCP1055 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Voltage - Supply (Vcc/Vdd) | 7.5V~10V |
| Topology | Flyback |
| Min Input Voltage | -300mV |
| Control Mode | VOLTAGE-MODE |
| Output Current-Max | 2A |
| Max Input Voltage | 10V |
| Halogen Free | Halogen Free |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Load, Over Temperature |
| Duty Cycle | 77% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.5V |
| Height | 1.57mm |
| Length | 6.5mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1055ST136T3G Overview
This ac to dc converter is included in the package TO-261-4, TO-261AA .The AC/DC power converter is available in Tape & Reel (TR) .As you can see, this AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.Within the range of 7.5V~10V supply voltage (Vcc/Vdd), it can be used.Total terminations are 4 .The ac/dc converter has a total of 4 pins.The ac-dc converter has 4 pins.Suitable mounting is provided by Surface Mount .The NCP1055 family can be used to search for similar acdc converters.The number of outputs to run is 1 .The ac to dc conversions can be found in Switching Regulator or Controllers .A high efficiency is achieved when operating at a frequency of 136kHz .A maximum current of 2A may be supplied to the ac to dc inverter.The AC to DC converter can be powered from the input voltage under 10V .The AC to DC inverter may be operated with an input voltage less than -300mV volts.
NCP1055ST136T3G Features
Packaged with TO-261-4, TO-261AA
With 4 pins
NCP1055ST136T3G Applications
There are a lot of ON Semiconductor NCP1055ST136T3G AC DC Converters applications.
- Adapters for Handheld Electronics
- PDAs
- Switching AC-DC Adapter
- White goods
- Utility meters
- Home Appliance Applications
- Standby power supplies for IR
- Industrial controls
- Handheld/Battery-Powered Systems
- Set -Top Box (STB) Power Supply
