banner_page

NCP1063AP100G

7V~20V 7 Pin AC to DC power converter100kHz


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NCP1063AP100G
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 459
  • Description: 7V~20V 7 Pin AC to DC power converter100kHz (Kg)

Details

Tags

Parameters
Voltage - Breakdown 700V
Voltage - Start Up 9V
Min Input Voltage (AC) 85V
Max Input Voltage (AC) 265V
Height 4.95mm
Length 10.16mm
Width 7.11mm
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 14 hours ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Number of Pins 7
Operating Temperature -40°C~125°C TJ
Packaging Tube
Published 2006
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Power Rating 7.8W
Max Power Dissipation 15.5W
Max Output Current 1.5A
Voltage - Supply (Vcc/Vdd) 7V~20V
Topology Buck, Flyback
Min Input Voltage -300mV
Frequency - Switching 100kHz
Max Input Voltage 20V
Internal Switch(s) Yes
Fault Protection Over Load, Over Power, Over Temperature, Short Circuit
Duty Cycle 66%
Output Isolation Either

NCP1063AP100G Overview


In the 8-DIP (0.300, 7.62mm), 7 Leads package, the ac to dc converter is embedded.The AC/DC power converter Tube is available for this product.As you can see, this AC/DC converter is mounted in the way of Through Hole .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~125°C TJ .As soon as the switching frequency reaches 100kHz , the circuit is closed.As long as the supply voltage (Vcc/Vdd) is within the range of 7V~20V , the AC/DC converter may be used.There are 7 pins on this ac/dc converter.Through Hole is a suitable mounting point for the ac dc converters.You may read the REACH SVHC standard at No SVHC .The AC to DC converter can be powered from the input voltage under 20V .It is possible to operate the AC to DC inverter with an input voltage that is less than -300mV V.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .

NCP1063AP100G Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins

NCP1063AP100G Applications


There are a lot of ON Semiconductor NCP1063AP100G AC DC Converters applications.

  • Auxiliary Power Supply
  • Battery Chargers
  • Standby Power for General Off-Line Applications
  • USB type-c v1.2 chargers with optional VDM
  • AC/DC Adaptors/Chargers for PDAs
  • Low-Voltage I/O System Power
  • Adapter for ADSL
  • AC/DC Adaptors/Chargers for Cordless Phone
  • Charger
  • USB-PD 2.0

Write a review

Note: HTML is not translated!
    Bad           Good