NCP1070P065G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 14W |
| Max Power Dissipation | 14W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 8.6V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 265V |
| Rise Time | 20ns |
| Fall Time (Typ) | 10 ns |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 72 % |
| Duty Cycle | 68% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.2V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1070P065G Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .It is available in Tube AC/DC power converter.In this case, the AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~125°C TJ °C.This AC DC converter employs SWITCHING CONTROLLER analog IC type.When the switching frequency reaches 65kHz , the circuit is closed.This AC/DC converter is designed for use within the range of 6.3V~10V supply voltage (Vcc/Vdd).There are a total of 7 terminations.In this ac/dc converter, there are 7 pins.Suitable mounting is provided by Through Hole .The ac to dc conversions are contained in Switching Regulator or Controllers .Currently, the output current is set to 250mA .It is possible to read the REACH SVHC standard at: No SVHC .The AC to DC converter input voltage can be powered under 265V .It is possible to use the AC to DC inverter with an input voltage less than 85V V.At 8.6V supply voltage, the interface IC conducts.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .
NCP1070P065G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
Output Current at 250mA
Operating Supply Voltage at the range of 8.6V
NCP1070P065G Applications
There are a lot of ON Semiconductor NCP1070P065G AC DC Converters applications.
- Consumer electronics
- Low power ac?dc Adapters for Chargers
- PDAs
- AC?DC USB chargers for Cell Phones
- Adapter/Charger for Cordless Phones
- 3.3V power supplies
- DVD players
- Battery chargers for cordless
- Automotive Telematics
- Adapters for Handheld Electronics
