banner_page

NCP1070P100G

7 Terminations6.3V~10V 7 Pin AC to DC power converter100kHz


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NCP1070P100G
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 446
  • Description: 7 Terminations6.3V~10V 7 Pin AC to DC power converter100kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Number of Pins 7
Operating Temperature -40°C~125°C TJ
Packaging Tube
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish Tin (Sn)
HTS Code 8542.39.00.01
Subcategory Switching Regulator or Controllers
Max Power Dissipation 14W
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Qualification Status Not Qualified
Operating Supply Voltage 8.6V
Input Voltage-Nom 8V
Analog IC - Other Type SWITCHING CONTROLLER
Output Current 250mA
Voltage - Supply (Vcc/Vdd) 6.3V~10V
Topology Flyback
Control Mode CURRENT-MODE
Frequency - Switching 100kHz
Internal Switch(s) Yes
Fault Protection Over Load, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 72 %
Duty Cycle 68%
Output Isolation Isolated
Voltage - Breakdown 700V
Voltage - Start Up 8.2V
Height Seated (Max) 5.33mm
Length 9.59mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NCP1070P100G Overview


In the package 8-DIP (0.300, 7.62mm), 7 Leads , the ac to dc converter is embedded.Tube case is available for the ac dc converter.Through Hole mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~125°C TJ °C in order to achieve its full performance.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.In this AC to DC transformer, the switching frequency is 100kHz .As long as the supply voltage (Vcc/Vdd) is within the range of 6.3V~10V , the AC/DC converter may be used.Total terminations are 7 .On the ac/dc converter, there are 7 pins.It are possible to mount thare ac dc converters by Through Hole .The ac to dc conversions are contained in Switching Regulator or Controllers .Current output is set to 250mA .Interface ICs conduct when the supply voltage is 8.6V .

NCP1070P100G Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Output Current at 250mA
Operating Supply Voltage at the range of 8.6V

NCP1070P100G Applications


There are a lot of ON Semiconductor NCP1070P100G AC DC Converters applications.

  • AC?DC USB chargers for Cell Phones
  • Standby power supplies for VCR
  • Standby Power Supplies
  • Low power ac?dc Adapters for Chargers
  • Power tools
  • Digital cameras
  • Dimmers
  • WiFi Wireless
  • Vacuum Cleaner
  • Home appliances

Write a review

Note: HTML is not translated!
    Bad           Good