NCP1070P130G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 14W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 8.6V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 130kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 72 % |
| Duty Cycle | 68% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.2V |
| Height Seated (Max) | 5.33mm |
| Length | 9.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1070P130G Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.The AC/DC power converter type is Tube .There is a mounting point for this AC/DC converter in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~125°C TJ °C.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.In this AC to DC transformer, the switching frequency is 130kHz .Vcc/Vdd can be used within the range of 6.3V~10V supply voltage.As a result, it has had 7 terminations.There are 7 pins on the ac/dc converter.There are no problem mounting the ac dc converters by Through Hole .Switching Regulator or Controllers includes the ac to dc conversions.250mA is set as the output current.It is possible for the interface IC to conduct when the supply voltage is 8.6V .
NCP1070P130G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 130kHz
With 7 pins
Output Current at 250mA
Operating Supply Voltage at the range of 8.6V
NCP1070P130G Applications
There are a lot of ON Semiconductor NCP1070P130G AC DC Converters applications.
- Digital cameras
- Z-Wave
- AC-DC Output Power Conversion Applications
- Charger
- Automotive Infotainment
- Tablets
- Adapters for Handheld Electronics
- Cellular phone chargers
- Air Conditioning
- Universal input AC/DC adapters (15W - 45W)
