NCP1072P100BG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 14 hours ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Power (Watts) | 19W |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 10W |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Qualification Status | Not Qualified |
| Max Output Current | 1.5A |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 69% |
| Output Isolation | Isolated |
| Voltage - Start Up | 8.2V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1072P100BG Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.The ac dc converter is available in Tube case.A AC/DC converter of this type is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~125°C TJ degrees Celsius.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.As a result, the switching frequency reaches 100kHz .Within the range of 6.3V~10V supply voltage (Vcc/Vdd), it can be used.It has a total of 7 terminations.In this ac/dc converter, there are 7 pins.Through Hole are the recommended mounting method for the ac dc converters.The ac to dc conversions can be found in Switching Regulator or Controllers .It is possible to read the REACH SVHC standard at: No SVHC .Under 265V , it is possible to power the AC to DC converter's input voltage.An input voltage of less than 85V volts can be used with the AC to DC inverter.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .
NCP1072P100BG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
NCP1072P100BG Applications
There are a lot of ON Semiconductor NCP1072P100BG AC DC Converters applications.
- Power tools fast chargers with trickle and on/off
- Air conditioners
- Home Appliance Applications
- MP3
- Power adapters for network devices
- Adapter/Charger for Cordless Phones
- Remotely-controlled appliances
- Rice Cooker
- Small off-line low voltage power supplies
- SMPS house keeping power supplies
