banner_page

NCP1072P100G

7 Terminations6.3V~10V 7 Pin NCP1072 AC to DC power converter1 Outputs100kHz


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-NCP1072P100G
  • Package: 8-DIP (0.300, 7.62mm), 7 Leads
  • Datasheet: PDF
  • Stock: 806
  • Description: 7 Terminations6.3V~10V 7 Pin NCP1072 AC to DC power converter1 Outputs100kHz (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Mount Through Hole
Mounting Type Through Hole
Package / Case 8-DIP (0.300, 7.62mm), 7 Leads
Number of Pins 7
Operating Temperature -40°C~125°C TJ
Packaging Tube
Published 2009
JESD-609 Code e3
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 7
ECCN Code EAR99
Terminal Finish Tin (Sn)
Subcategory Switching Regulator or Controllers
Power Rating 19W
Max Power Dissipation 19W
Terminal Position DUAL
Number of Functions 1
Terminal Pitch 2.54mm
Base Part Number NCP1072
Pin Count 7
Number of Outputs 1
Max Output Current 250mA
Input Voltage-Nom 8V
Analog IC - Other Type SWITCHING CONTROLLER
Operating Supply Current 700μA
Output Current 250mA
Voltage - Supply (Vcc/Vdd) 6.3V~10V
Topology Flyback
Min Input Voltage 100V
Control Mode CURRENT-MODE
Frequency - Switching 100kHz
Max Input Voltage 250V
Halogen Free Halogen Free
Rise Time 20ns
Fall Time (Typ) 10 ns
Nominal Input Voltage 230V
Internal Switch(s) Yes
Fault Protection Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit
Max Duty Cycle 72 %
Duty Cycle 68%
Output Isolation Isolated
Voltage - Breakdown 700V
Voltage - Start Up 8.2V
Min Input Voltage (AC) 100V
Max Input Voltage (AC) 250V
Height 3.44mm
Length 10.16mm
Width 6.6mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free

NCP1072P100G Overview


A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.Tube case is available for the ac dc converter.There is a mounting point for this AC/DC converter in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~125°C TJ degrees Celsius.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.As soon as the switching frequency reaches 100kHz , the circuit is closed.As long as the supply voltage (Vcc/Vdd) is within the range of 6.3V~10V , the AC/DC converter may be used.Total terminations are 7 .There are 7 pins on the ac/dc converter.A total of 7 pins are present on the ac-dc converter.Through Hole is the recommended mounting method for the ac dc converters.Search similar acdc converters based on NCP1072 family members.A total of 1 outputs are available for processing.The following ac to dc conversions are contained in Switching Regulator or Controllers .Currently, the output current is set to 250mA .You can read the standard of REACH SVHC : No SVHC .It is available to power the AC to DC converter input voltage under 250V .If the input voltage is less than 100V V, the AC to DC inverter can be used.A AC to DC power converter's input voltage (AC) should not exceed 250V .

NCP1072P100G Features


Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Output Current at 250mA

NCP1072P100G Applications


There are a lot of ON Semiconductor NCP1072P100G AC DC Converters applications.

  • Utility meters
  • AC/DC LED Driver applications
  • Standby power supplies for TV
  • Wireless System
  • Switching AC-DC Adapter
  • Wall switches
  • Tablets
  • Power Adaptors
  • Cleaners
  • Home appliances

Write a review

Note: HTML is not translated!
    Bad           Good