NCP1072STAT3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Package / Case | SOT-223 |
| Number of Pins | 4 |
| Weight | 188.014037mg |
| Packaging | Tape & Reel (TR) |
| Published | 2000 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 19W |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | Adjustable |
| Max Output Current | 250mA |
| Input Voltage-Nom | 8V |
| Temperature Grade | AUTOMOTIVE |
| Max Supply Voltage | 10V |
| Min Supply Voltage | 100V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Topology | Flyback |
| Min Input Voltage | 100V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 250V |
| Halogen Free | Halogen Free |
| Breakdown Voltage | 700V |
| Rise Time | 20ns |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 230V |
| Max Duty Cycle | 72 % |
| Isolation | Isolated |
| Switching Frequency | 65kHz |
| Min Input Voltage (AC) | 100V |
| Max Input Voltage (AC) | 250V |
| Height | 1.65mm |
| Length | 6.7mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1072STAT3G Overview
This ac to dc converter is included in the package SOT-223 .In Tape & Reel (TR) case, the ac dc converter is available.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.There are a total of 4 terminations.There are 4 pins on the ac/dc converter.There are 4 pins in the ac-dc converter.Surface Mount is a suitable mounting point for the ac dc converters.AC to DC converter is necessary to run 1 outputs.AC to DC converter is included in Switching Regulator or Controllers .There is 250mA output current set.REACH SVHC standard can be found at No SVHC .An input voltage of 250V is available for powering the AC to DC converter.An input voltage of less than 100V volts is acceptable for use with this AC to DC inverter.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 250V .Keeping the 125°C value at its maximum ensures the AC to DC power converter runs smoothly.This isolated switch's minimum working temperature must not be less than -40°C .AC to DC converter can work with the minimum supply voltage of 100V .It uses Adjustable as an output.
NCP1072STAT3G Features
Packaged with SOT-223
With 4 pins
Output Current at 250mA
Output Type : Adjustable
NCP1072STAT3G Applications
There are a lot of ON Semiconductor NCP1072STAT3G AC DC Converters applications.
- Open Frame Switching Power Supply
- AC-DC Output Power Conversion Applications
- Battery Chargers
- Charger
- Utility meters
- Power adapters for network devices
- Battery chargers for cordless
- Standby power
- ATX/BTX Auxiliary Power
- Cleaners
