NCP1072STBT3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Weight | 188.014037mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 19W |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Base Part Number | NCP1072 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Max Output Current | 250mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 250mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Min Input Voltage | 100V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 250V |
| Halogen Free | Halogen Free |
| Rise Time | 20ns |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 230V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 72 % |
| Duty Cycle | 68% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.2V |
| Min Input Voltage (AC) | 100V |
| Max Input Voltage (AC) | 250V |
| Height | 1.65mm |
| Length | 6.7mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1072STBT3G Overview
In the package TO-261-4, TO-261AA , the ac to dc converter is embedded.You can get it in AC/DC power converter Tape & Reel (TR) .A AC/DC converter of this type is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~125°C TJ °C to deliver its optimal performance.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.There is 100kHz switching frequency.The AC/DC converter is capable of being used when the supply voltage is 6.3V~10V (Vcc/Vdd).Total terminations are 4 .Approximately 4 pins are present on the ac/dc converter.A total of 4 pins are present on the ac-dc converter.The ac dc converters is suitable for mounting by Surface Mount .If you select the NCP1072 family, you will be able to search for similar acdc converters.AC to DC converter is necessary to run 1 outputs.The ac to dc conversions are included in Switching Regulator or Controllers .The output current is set to 250mA .You may read the REACH SVHC standard at No SVHC .The AC to DC converter can be powered under 250V voltage.An input voltage of less than 100V V is required to operate the AC to DC inverter.The AC to DC power converter's input voltage (AC) should be below 250V .
NCP1072STBT3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 100kHz
With 4 pins
Output Current at 250mA
NCP1072STBT3G Applications
There are a lot of ON Semiconductor NCP1072STBT3G AC DC Converters applications.
- Networking
- Set -Top Box (STB) Power Supply
- IoT Applications
- Battery chargers for cellular phones
- Standby power supplies for TV
- Standby power supplies for VCR
- Standby Power Supplies
- Remotely-controlled appliances
- Linear Adapter Replacements
- Adapters
