NCP1075P065G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 19W |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | NCP1075 |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Adjustable |
| Max Output Current | 450mA |
| Operating Supply Voltage | 8.2V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 450mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Min Input Voltage | 100V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 250V |
| Halogen Free | Halogen Free |
| Rise Time | 20ns |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 230V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 72 % |
| Duty Cycle | 68% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 100V |
| Max Input Voltage (AC) | 250V |
| Height | 3.44mm |
| Length | 10.16mm |
| Width | 6.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1075P065G Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .It is available in Tube AC/DC power converter.This AC/DC converter is mounted in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~125°C TJ °C to deliver its optimal performance.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.In this AC to DC transformer, the switching frequency is 65kHz .Within the range of 6.3V~10V supply voltage (Vcc/Vdd), it can be used.There are a total of 7 terminations in it.There are 7 pins on this ac/dc converter.In this ac-dc converter, there are 7 pins.It are possible to mount thare ac dc converters by Through Hole .The NCP1075 family can be used to search for similar acdc converters.There are 1 outputs to be run.AC to DC converter is included in Switching Regulator or Controllers .Currently, the output current is set to 450mA .You may read the REACH SVHC standard at No SVHC .Input voltages under 250V can be used to power the AC to DC converter.The AC to DC inverter may be operated with an input voltage less than 100V volts.Interface ICs conduct when the supply voltage is 8.2V .There should be a voltage (AC) that can be applied to the AC to DC power converter under 250V .It uses Adjustable as an output.
NCP1075P065G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
Output Current at 450mA
Operating Supply Voltage at the range of 8.2V
Output Type : Adjustable
NCP1075P065G Applications
There are a lot of ON Semiconductor NCP1075P065G AC DC Converters applications.
- Remotely-controlled appliances
- Adapters
- USB-PD 2.0
- Industrial controls
- Low-Voltage I/O System Power
- WiFi Wireless
- Power Adaptors
- Power tools fast chargers with trickle and on/off
- Adapter/Charger for Cordless Phones
- AC?DC USB chargers for Cameras
