NCP1075P100G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Weight | 850.995985mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2013 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 7 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 450mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Min Input Voltage | -300mV |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 10V |
| Halogen Free | Halogen Free |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 68 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.2V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1075P100G Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .It is available in Tube AC/DC power converter.There is a mounting point for this AC/DC converter in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~125°C TJ °C to deliver its optimal performance.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.When the switching frequency reaches 100kHz , the process is complete.This AC/DC converter is designed for use within the range of 6.3V~10V supply voltage (Vcc/Vdd).There have been 7 terminations of this program.There are 7 pins on this ac/dc converter.There are 7 pins in total.The ac dc converters are suitable for mounting by Through Hole .There are 1 outputs to be run.AC to DC converter is contained in Switching Regulator or Controllers .The output current is set to 450mA .Input voltages under 10V can be used to power the AC to DC converter.The AC to DC inverter may be operated with an input voltage less than -300mV volts.
NCP1075P100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Output Current at 450mA
NCP1075P100G Applications
There are a lot of ON Semiconductor NCP1075P100G AC DC Converters applications.
- LED lights
- MP3
- White goods
- DVD players
- Portable Apparatus
- Standby Power Supplies
- Chargers for cell/cordless phones
- Lighting controls
- Z-Wave
- WiFi Wireless
