NCP1075STAT3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Weight | 188.014037mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 19W |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Base Part Number | NCP1075 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Output Type | Adjustable |
| Max Output Current | 450mA |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 450mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Min Input Voltage | 100V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 250V |
| Halogen Free | Halogen Free |
| Rise Time | 20ns |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 230V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 72 % |
| Duty Cycle | 68% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.2V |
| Min Input Voltage (AC) | 100V |
| Max Input Voltage (AC) | 250V |
| Height | 1.65mm |
| Length | 6.7mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1075STAT3G Overview
TO-261-4, TO-261AA is the package in which the ac to dc converter is embedded.In Tape & Reel (TR) AC/DC power converter, it is available.There is a mounting point for this AC/DC converter in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~125°C TJ °C so that it can deliver its performance.The AC DC converter uses a type SWITCHING CONTROLLER analog integrated circuit.At this point, the switching frequency reaches 65kHz .Supply voltage (Vcc/Vdd) does not need to exceed 6.3V~10V .It has a total of 4 terminations.On this ac/dc converter, there are 4 pins.The pins of the ac-dc converter count up to 4 .The ac dc converters is suitable for mounting by Surface Mount .You can search similar acdc converters based on NCP1075 family.A total of 1 outputs are available for processing.Switching Regulator or Controllers contains the ac to dc conversions.450mA is set as the output current.SVHC for REACH can be found in the standard No SVHC .Input voltages under 250V can be used to power the AC to DC converter.A voltage of less than 100V V can be used with the AC to DC inverter.AC to DC power converters should be able to accept input voltages (AC) below 250V .It is configured with Adjustable as the output.
NCP1075STAT3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 65kHz
With 4 pins
Output Current at 450mA
Output Type : Adjustable
NCP1075STAT3G Applications
There are a lot of ON Semiconductor NCP1075STAT3G AC DC Converters applications.
- Humidifier
- Battery chargers for media tablets
- Battery chargers for mobile devices with touchpad display
- Battery chargers for cellular phones
- LED lights
- Switching AC-DC Adapter
- AC/DC Adaptors/Chargers for PDAs
- Open Frame Switching Power Supply
- WiFi Wireless
- Z-Wave
