NCP1075STBT3G
| Parameters | |
|---|---|
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Weight | 188.014037mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 19W |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Base Part Number | NCP1075 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Max Output Current | 450mA |
| Operating Supply Voltage | 8.2V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 450mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Min Input Voltage | 100V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 250V |
| Halogen Free | Halogen Free |
| Rise Time | 20ns |
| Fall Time (Typ) | 10 ns |
| Nominal Input Voltage | 230V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 72 % |
| Duty Cycle | 68% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 100V |
| Max Input Voltage (AC) | 250V |
| Height | 1.65mm |
| Length | 6.7mm |
| Width | 3.7mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
NCP1075STBT3G Overview
There is a ac to dc converter embedded in package TO-261-4, TO-261AA .It is available in Tape & Reel (TR) AC/DC power converter.As you can see, this AC/DC converter is mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~125°C TJ °C to deliver its optimal performance.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.When the switching frequency reaches 100kHz , the circuit is closed.Within the range of 6.3V~10V supply voltage (Vcc/Vdd), it can be used.It has a total of 4 terminations.A ac/dc converter with 4 pins is available.Up to 4 pins are present on the ac-dc converter.Surface Mount is the recommended mounting method for the ac dc converters.If you select the NCP1075 family, you will be able to search similar acdc converters.There are 1 outputs to run.The ac to dc conversions are contained in Switching Regulator or Controllers .Current output is set to 450mA .You are able to read the REACH SVHC standard at: No SVHC .Input voltage for the AC to DC converter is available under 250V .It is possible to use the AC to DC inverter with an input voltage less than 100V V.Interfacing ICs conduct when there is 8.2V supply voltage.A AC to DC power converter's input voltage (AC) should not exceed 250V .
NCP1075STBT3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 100kHz
With 4 pins
Output Current at 450mA
Operating Supply Voltage at the range of 8.2V
NCP1075STBT3G Applications
There are a lot of ON Semiconductor NCP1075STBT3G AC DC Converters applications.
- Universal Off-Line Power Supplies
- Home Appliance Applications
- Standby and Auxiliary Power Supplies
- AC-DC Output Power Conversion Applications
- Standby power
- Standby Power for General Off-Line Applications
- Smartphones
- Power Adaptors
- USB-PD 2.0
- Consumer electronics
