NCP1075STCT3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Weight | 250.212891mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 10W |
| Max Power Dissipation | 19W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Frequency | 130kHz |
| Base Part Number | NCP1075 |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Input Voltage-Nom | 8V |
| Voltage | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 450mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 265V |
| Halogen Free | Halogen Free |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 72 % |
| Duty Cycle | 68% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.2V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1075STCT3G Overview
This ac to dc converter is embedded in package TO-261-4, TO-261AA .The AC/DC power converter type is Tape & Reel (TR) .There is a mounting point for this AC/DC converter in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~125°C TJ degrees Celsius.Analog ICs of type SWITCHING CONTROLLER are used in this AC DC converter.The AC/DC converter is capable of being used when the supply voltage is 6.3V~10V (Vcc/Vdd).A total of 4 terminations have been recorded.It contains 4 pins.Up to 4 pins are present on the ac-dc converter.It is suitable for mounting by Surface Mount .Similar acdc converters can be found using the NCP1075 family.AC to DC converter is necessary to run 1 outputs.There are a ac to dc conversions included in Switching Regulator or Controllers .Currently, the output current is set to 450mA .A high efficiency is achieved when operating at a frequency of 130kHz .Here is the standard for REACH SVHC : No SVHC .There is an option to power the AC to DC converter input voltage under 265V .If the input voltage is less than 85V V, the AC to DC inverter can be used.An input voltage (AC) should be applied under 265V to the AC to DC power converter.
NCP1075STCT3G Features
Packaged with TO-261-4, TO-261AA
With 4 pins
Output Current at 450mA
NCP1075STCT3G Applications
There are a lot of ON Semiconductor NCP1075STCT3G AC DC Converters applications.
- Appliance Power Supplies
- Standby and Auxiliary Power Supplies
- Power tools fast chargers with trickle and on/off
- Low power ac?dc Adapters for Chargers
- Replaces linear transformers
- Dimmers
- Lighting controls
- Z-Wave
- Automotive Telematics
- Auxiliary Power Supplies
