NCP1076P065G
| Parameters | |
|---|---|
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Power Rating | 25W |
| Max Power Dissipation | 25W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 7 |
| Operating Supply Voltage | 8.5V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 650mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 265V |
| Rise Time | 20ns |
| Fall Time (Typ) | 10 ns |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 73 % |
| Duty Cycle | 69% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.1V |
NCP1076P065G Overview
It is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .The AC/DC power converter type is Tube .In this case, the AC/DC converter is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~125°C TJ degrees Celsius.In this AC DC converter, an analog integrated circuit (IC) of type SWITCHING CONTROLLER is employed.At this point, the switching frequency reaches 65kHz .This AC/DC converter is suitable for operation in the range of 6.3V~10V supply voltage (Vcc/Vdd).In total, it has 7 terminations.On this ac/dc converter, there are 7 pins.There are a total of 7 pins on the ac-dc converter.Through Hole are the recommended mounting method for the ac dc converters.Currently, the output current is set to 650mA .You can read the standard for REACH SVHC at: No SVHC .Input voltage for the AC to DC converter is available under 265V .An input voltage of less than 85V V is required to operate the AC to DC inverter.Interfacing ICs conduct when there is 8.5V supply voltage.Input voltage (AC) should be below 265V .
NCP1076P065G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
Output Current at 650mA
Operating Supply Voltage at the range of 8.5V
NCP1076P065G Applications
There are a lot of ON Semiconductor NCP1076P065G AC DC Converters applications.
- Automotive Telematics
- Chargers for cell/cordless phones
- Automotive Clusters
- Adapter for ADSL
- Consumer electronics
- Digital cameras
- Adapters for Handheld Electronics
- Records
- Replaces linear transformers
- Rice Cooker
