NCP1076P100G
| Parameters | |
|---|---|
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 25W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 7 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 8.5V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 650mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 73 % |
| Duty Cycle | 69% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.1V |
| Height Seated (Max) | 5.33mm |
| Length | 9.59mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
NCP1076P100G Overview
There is a ac to dc converter embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .There is a AC/DC power converter of Tube available.There is a mounting point for this AC/DC converter in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~125°C TJ °C.SWITCHING CONTROLLER analog ICs are employed in this AC DC converter.In this AC to DC transformer, the switching frequency is 100kHz .The AC/DC converter is capable of being used when the supply voltage is 6.3V~10V (Vcc/Vdd).It has a total of 7 terminations.Approximately 7 pins are present on the ac/dc converter.The ac-dc converter has 7 pins.Through Hole are the recommended mounting method for the ac dc converters.The ac to dc conversions are included in Switching Regulator or Controllers .Current output is set to 650mA .The interface IC conducts when the supply voltage is 8.5V .
NCP1076P100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Output Current at 650mA
Operating Supply Voltage at the range of 8.5V
NCP1076P100G Applications
There are a lot of ON Semiconductor NCP1076P100G AC DC Converters applications.
- Standby Power Supplies
- Appliances
- LED Driver
- Handheld/Battery-Powered Systems
- AC?DC USB chargers for Cell Phones
- Battery Chargers
- Standby Power for General Off-Line Applications
- Low-Voltage I/O System Power
- Portable Apparatus
- Industrial controls
