NCP1076STAT3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 25W |
| Max Power Dissipation | 25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 8.5V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 650mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 265V |
| Rise Time | 20ns |
| Fall Time (Typ) | 10 ns |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 73 % |
| Duty Cycle | 69% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.1V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 1.65mm |
| Length | 6.7mm |
| Width | 3.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1076STAT3G Overview
An embedded ac to dc converter is included in TO-261-4, TO-261AA package.The AC/DC power converter is available in Tape & Reel (TR) .The AC/DC converter is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~125°C TJ °C in order to perform.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.At this point, the switching frequency reaches 65kHz .A range of 6.3V~10V supply voltages (Vcc/Vdd) can be used.Total terminations are 4 .In this ac/dc converter, there are 4 pins.There are 4 pins in total.It is suitable for mounting by Surface Mount .The ac to dc conversions are contained in Switching Regulator or Controllers .In this AC to DC transformer, the output current is set to 650mA .REACH SVHC standard can be found at No SVHC .There is an option to power the AC to DC converter input voltage under 265V .An input voltage of less than 85V volts can be used with the AC to DC inverter.When the supply voltage is 8.5V , the interface IC conducts.The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .
NCP1076STAT3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 65kHz
With 4 pins
Output Current at 650mA
Operating Supply Voltage at the range of 8.5V
NCP1076STAT3G Applications
There are a lot of ON Semiconductor NCP1076STAT3G AC DC Converters applications.
- Tablets
- Industrial controls
- White goods
- Set -Top Box (STB) Power Supply
- Automotive Infotainment
- ATX/BTX Auxiliary Power
- Adapter/Charger for Cordless Phones
- Networking
- Standby power
- Z-Wave
