NCP1077P065G
| Parameters | |
|---|---|
| HTS Code | 8542.39.00.01 |
| Power Rating | 25W |
| Max Power Dissipation | 25W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 7 |
| Operating Supply Voltage | 8.5V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 265V |
| Rise Time | 20ns |
| Fall Time (Typ) | 10 ns |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 73 % |
| Duty Cycle | 69% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.1V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 4.95mm |
| Length | 10.16mm |
| Width | 7.11mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 7 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2007 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
NCP1077P065G Overview
This ac to dc converter is embedded in package 8-DIP (0.300, 7.62mm), 7 Leads .Tube case is available for the ac dc converter.There is a mounting point for this AC/DC converter in the way of Through Hole .For the ac dc converter to perform at its best, it should be operated at a temperature of -40°C~125°C TJ °C.An analog IC of type SWITCHING CONTROLLER is employed in this AC DC converter.There is 65kHz switching frequency.This AC/DC converter is suitable for operation in the range of 6.3V~10V supply voltage (Vcc/Vdd).As a result, it has a total of 7 terminations.On the ac/dc converter, there are 7 pins.The pins of the ac-dc converter count up to 7 .Through Hole is the recommended mounting method for the ac dc converters.Currently, the output current is set to 800mA .SVHC for REACH can be found in the standard No SVHC .It is available to power the AC to DC converter input voltage under 265V .An input voltage of less than 85V V is required to operate the AC to DC inverter.When the supply voltage is 8.5V , the interface IC conducts.An input voltage (AC) should be applied to the AC to DC power converter that falls below 265V volts.
NCP1077P065G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 65kHz
With 7 pins
Output Current at 800mA
Operating Supply Voltage at the range of 8.5V
NCP1077P065G Applications
There are a lot of ON Semiconductor NCP1077P065G AC DC Converters applications.
- Standby power supplies for VCR
- Battery chargers for mobile devices with touchpad display
- AC/DC LED Driver applications
- Utility meters
- Automotive Infotainment
- Lighting controls
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Power tools
- Power Adaptors
- Automotive Telematics
