NCP1077STAT3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Weight | 188.014037mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 25W |
| Max Power Dissipation | 25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 4 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 8.1V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 1mA |
| Nominal Supply Current | 1mA |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Output Power | 25W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 65kHz |
| Max Input Voltage | 265V |
| Rise Time | 20ns |
| Fall Time (Typ) | 10 ns |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 69 % |
| Max Junction Temperature (Tj) | 150°C |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height | 1.75mm |
| Length | 6.7mm |
| Width | 3.7mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1077STAT3G Overview
There is a ac to dc converter embedded in package TO-261-4, TO-261AA .The AC/DC power converter is available in Tape & Reel (TR) .There is a AC/DC converter mounted in the way of Surface Mount .The ac dc converter should be operated at a temperature of -40°C~125°C TJ °C to deliver its optimal performance.Analog IC type SWITCHING CONTROLLER is utilized in this AC DC converter.When the switching frequency reaches 65kHz , the circuit is closed.The AC/DC converter is capable of being used when the supply voltage is 6.3V~10V (Vcc/Vdd).There have been 4 terminations of this program.In this ac/dc converter, there are 4 pins.There are a total of 4 pins on the ac-dc converter.It are possible to mount thare ac dc converters by Surface Mount .A total of 1 outputs are to be processed.There are a ac to dc conversions included in Switching Regulator or Controllers .We are setting the output current to 800mA .You are able to read the REACH SVHC standard at: No SVHC .Input voltages under 265V can be used to power the AC to DC converter.It is assumed that a coverter generates 25W as its output power.Input voltages less than 85V volts can be used to operate the AC to DC inverter.When the supply voltage is 8.1V , the interface IC conducts.Ideally, the input voltage (AC) applied to the AC to DC power converter should be less than 265V .
NCP1077STAT3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 65kHz
With 4 pins
Output Current at 800mA
Operating Supply Voltage at the range of 8.1V
NCP1077STAT3G Applications
There are a lot of ON Semiconductor NCP1077STAT3G AC DC Converters applications.
- Vacuum Cleaner
- AC?DC USB chargers for Tablets
- Small off-line low voltage power supplies
- Portable Apparatus
- MPS parts
- Appliance Power Supplies
- Low-Voltage I/O System Power
- Laptops
- Handheld/Battery-Powered Systems
- Auxiliary Power Supplies
