NCP1077STCT3G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | TO-261-4, TO-261AA |
| Number of Pins | 4 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 4 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 25W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Terminal Pitch | 2.3mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 4 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 8.5V |
| Input Voltage-Nom | 8V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Current | 800mA |
| Voltage - Supply (Vcc/Vdd) | 6.3V~10V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 130kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Over Load, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 73 % |
| Duty Cycle | 69% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Voltage - Start Up | 8.1V |
| Height Seated (Max) | 1.75mm |
| Length | 6.5mm |
| Width | 3.5mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1077STCT3G Overview
An embedded ac to dc converter is included in TO-261-4, TO-261AA package.The ac dc converter is available in Tape & Reel (TR) case.There is a AC/DC converter mounted in the way of Surface Mount .Ideally, the ac dc converter should be operated at a temperature of -40°C~125°C TJ degrees Celsius.A SWITCHING CONTROLLER analog integrated circuit is used in this AC DC converter.In this AC to DC transformer, the switching frequency is 130kHz .Supply voltage (Vcc/Vdd) does not need to exceed 6.3V~10V .There have been 4 terminations of this program.The ac/dc converter has a total of 4 pins.The pins of the ac-dc converter count up to 4 .Surface Mount is a suitable mounting point for the ac dc converters.The ac to dc conversions are contained in Switching Regulator or Controllers .It has been set to 800mA for the output current.It is possible for the interface IC to conduct when the supply voltage is 8.5V .
NCP1077STCT3G Features
Packaged with TO-261-4, TO-261AA
Switching Frequency at 130kHz
With 4 pins
Output Current at 800mA
Operating Supply Voltage at the range of 8.5V
NCP1077STCT3G Applications
There are a lot of ON Semiconductor NCP1077STCT3G AC DC Converters applications.
- Adapters
- Humidifier
- USB type-c v1.2 chargers with optional VDM
- AC?DC USB chargers for Cameras
- Cellular phone chargers
- Appliances
- Shaver Charger
- AC/DC LED Driver applications
- Set-top boxes
- Universal input AC/DC adapters (15W - 45W)
