NCP1093MNRG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 50.008559mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | HIPO™ |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 10 |
| Type | Controller (PD) |
| Terminal Finish | Tin (Sn) |
| Voltage - Supply | 0V~57V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 175MHz |
| Frequency Stability | 50 ppm |
| Base Part Number | NCP1093 |
| Pin Count | 10 |
| Max Output Current | 5mA |
| Number of Channels | 1 |
| Operating Supply Current | 600μA |
| Nominal Supply Current | 500mA |
| Power - Max | 25.5W |
| Max Output Voltage | 72V |
| Min Input Voltage | 0V |
| Max Input Voltage | 57V |
| Halogen Free | Halogen Free |
| Nominal Input Voltage | 57V |
| Min Output Voltage | -300mV |
| Internal Switch(s) | Yes |
| Standards | 802.3at (PoE+), 802.3af (PoE) |
| Height | 950μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
NCP1093MNRG Overview
It is included in the Tape & Reel (TR) package.Packaged according to 10-VFDFN Exposed Pad.The type of this PoE controller is Controller (PD).It has been reported that the number of channels is growing strongly/weakly: 1.For the sake of ensuring the reliability of the Po E controller, it functions at a temperature of -40°C~85°C.There is a voltage of 0V~57V that is used for the supply voltage of this electrical Po E controller.Base part numbers NCP1093 can be used to establish Po E controllers.A 10 termination involves terminating a transmission line with a power over ethernet controller whose characteristic impedance matches the line's.During normal operation, this electrical ethernet over power controller will produce 25.5W Watts of power.As you can see from the image, it is equipped with 10 pin count.The board has 10 pins.In order for 600μA to play its full role, it needs a supply current to be delivered to it.There is a 175MHz frequency associated with this electrical PoE ethernet controller.A maximum input voltage of 57V can be applied to this power over ethernet PoE controller.It is important to note that the minimal input voltage of this power over the ethernet controller is 0V.
NCP1093MNRG Features
Tape & Reel (TR) package
10 pin count
10 pins
NCP1093MNRG Applications
There are a lot of ON Semiconductor NCP1093MNRG Power Over Ethernet (PoE) Controllers applications.
- Lighting
- 4PPOE
- Outdoor Security Camera Equipment
- Non-Compliant, Application Specific Devices
- Pico-base Stations
- IP Phone Power Management
- Dual Signature PD/Forced UPOE
- POS Terminals
- Security Cameras
- IEEE 802.3bt (Draft) Compliant Devices
