NCP1124AP100G
| Parameters | |
|---|---|
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Voltage - Start Up | 17V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| Terminal Finish | Tin (Sn) |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Max Power Dissipation | 27W |
| Terminal Position | DUAL |
| Terminal Pitch | 2.54mm |
| JESD-30 Code | R-PDIP-T7 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 20V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Voltage - Supply (Vcc/Vdd) | 8.5V~35V |
| Topology | Flyback |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 100kHz |
| Rise Time | 4.25ns |
| Fall Time (Typ) | 9.32 ns |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 82 % |
| Duty Cycle | 80% |
NCP1124AP100G Overview
A ac to dc converter of the package 8-DIP (0.300, 7.62mm), 7 Leads contains the ac to dc converter.In Tube case, the ac dc converter is available.The AC/DC converter is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.The AC DC converter utilizes a type ANALOG CIRCUIT analog IC.At this point, the switching frequency reaches 100kHz .This AC/DC converter is suitable for operation in the range of 8.5V~35V supply voltage (Vcc/Vdd).There are a total of 7 terminations.It is suitable for mounting by Through Hole .There are a ac to dc conversions included in Switching Regulator or Controllers .An amount of current of 1A can be supplied to the ac to dc inverter.An interface IC conducts when its supply voltage is 20V .
NCP1124AP100G Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at 100kHz
Operating Supply Voltage at the range of 20V
NCP1124AP100G Applications
There are a lot of ON Semiconductor NCP1124AP100G AC DC Converters applications.
- Humidifier
- Linear Adapter Replacements
- Portable Apparatus
- Set-top boxes
- Auxiliary Power Supply
- Universal Off-Line Power Supplies
- Home Appliance Applications
- Standby Power Supplies
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Standby power supplies for TV
